Italiano English Germany Iran  
    www.olmeva.com  
O.L.ME.VA.
 
The photo here above, show’s a typical “OUTDOOR” medium size refilling paintball station.
The compressor, showed here, gas driven (or electric) fills the high pressure bottle, in this case the bottle above is 50 liters at 300 bar = 15m3/H of air available.
The high pressure bottle, which is connected by a filling hoses, 2 meters as standard, (however longer hoses are available), to a Fill Panel, in this case as above complete of 4 lever valve’s (PDF), 2 valve’s with exit at 300 bar and the other 2 with exit at 300 bar, This solution allows to always have the system connected and also, installing (as optional) the automatic re-start on the compressor we have the guarantee of having always the maximum pressure of 300 bar available in the bottle.
(the autorestart device back-up the pressure from 200 to 300 bar in the bottle).
The compressor infact, thanks to a pressure switch , when the pressure goes down from 300 to 200 bar it automatically restarts and back – up the pressure and this will always be done automatically.
In case the compressor comes as standard, this re-starting operation will be done manually.
ACCESSORIES
thumblarge
Fill Panel at 2 lever valve’s complete of pressure reducer 300/200 Bar, the 1st valve with exit at 300 Bar and the 2nd with exit at 200 barThis Fill panel at 2 lever valve’s comes complete of 2 “microhoses” (reinforced in Kevlar600 Bar), with it’s fast-in paintball connector’s.
All connector’s, serpentine’s, cooler’s, nut’s and bolt’s are in stainless steel.
The pressure reducer is of best quality, 300/200 Bar with possibility of different pressure setting’s. The gauges (showing the different pressure’s) fitted above each valve, allows the visibility of the correct recharging pressure‘s.
The lever Valve’s (PDF) of our “home made” production guarantee the maximum reliability and precision, so to quickly re-fill the paintball rifle, by turning the lever downward’s, filling begin’s at max pressure, returning to original position (lever at top), closes the air flow and depressurizes the hp microhoses so to be immediately ready to re-fill next painball rifle.
Each cycle is infact of only few second’s.The Fill Panel at 2 lever valve’s is the most sold product , it is possible to add some other valve’s so to have 4 or more exit’s.The “supporting Frame” (in zinced steel) double painted has got hole’s in the back so to be installed at wall.


Weight: Kg. 3.50
Dimensions: Cm 25 x 20 x20

thumblarge
Vedi
ingrandimento
 
thumblarge
This Fill panel at 4 lever valve’s comes complete of 4 “microhoses” (reinforced in Kevlar600 Bar), with it’s fast-in paintball connector’s.
All connector’s, serpentine’s, cooler’s, nut’s and bolt’s are in stainless steel.

The pressure reducer is of best quality, 300/200 Bar with possibility of different pressure setting’s .
The gauges (showing the different pressure’s) fitted above each valve, allows the visibility of the correct recharging pressure‘s.
The lever Valve’s (PDF) of our “home made” production guarantee the maximum reliability and precision, so to quickly re-fill the paintball rifle, by turning the lever downward’s, filling begin’s at max pressure, returning to original position (lever at top), closes the air flow and depressurizes the hp microhoses so to be immediately ready to re-fill next painball rifle.
Each cycle is infact of only few second’s.

To the Fill Panel at 4 lever valve’s, it is possible to add some other valve’s so to have 6 or more exit’s.
The “supporting Frame” (in zinced steel) double painted has got hole’s in the back so to be installed at wall.

Weight: Kg. 6.00

Dimensions: Cm 45 x 20 x20

thumblarge
Vedi
ingrandimento
Rubinettolarge
B 01770501 Nickeled Brass Connector ( in: Din 300 Bar, exit: fast fill connector for all paintball rifle’s)
Riduttore di pressione (regolabile) completo di attacco DIN 300Riduttore di pressione (regolabile) completo di attacco DIN 300
Pressure reducer ( adjustable at desired pressure's, usually : IN at 300 bar , OUT adjustable at 200 bar ), fitted on high pressure bottle air , It is complete of DIN 300 bar connector, lever valve, 2 manometer's , a special 60cm. high pressure microhose with quick-in connector for all paintball rifle's .
riduttore di pressionelarge
Pressure reducer ( adjustable at desired pressure's, usually : IN at 300 bar , OUT adjustable at 200 bar ), It is complete of DIN 300 bar connector, lever valve, 2 manometer's, a special 60cm. high pressure microhose with quick-in connector for all paintball rifle's .
Bombola con 1 rubinettolarge
High pressure bottle of 50 liters at 300 Bar ( 50 x 300 = 15m3/H of air available) with double valve DIN 300 Bar.
It is possible to order bottle of different capacity’s with Din 200 or Din 300 bar connectors (single or double’s ).
Used or re-conditioned bottle are also available.
For any further info, Pls contact ourt office’s
.
pdf Download PDF
COPYRIGHT © 2008 O.L.ME.VA. S.n.c.
O.L.ME.VA. S.n.c. Divisione AEROSUB • Viale S. Eufemia, 173 - 25135 Brescia (Italy) Tel. (0039) 030.336.62.91 • E-Mail: info@olmeva.com
Facebook